PUBLICATION

Articles

2018
247. H. E. Lee+, D. Lee+, T.-I. Lee, J. H. Shin, G.-M. Choi, C. Kim, S. H. Lee, J. H. Lee, Y. H. Kim, S.-M. Kang, S. H. Park, I.-S. Kang, T.-S. Kim, B.-S. Bae, and K. J. Lee “Wireless powered wearable micro light-emitting diodes”, Nano Energy, 55 454-462 (2018) PDF
246. Y. H. Kim, G.-M. Choi, D. Shin, Y. H. Kim, D. Jang, and B.-S. Bae “Transparent Urethane−Siloxane Hybrid Materials for Flexible Cover Windows with Ceramic-Like Strength, yet Polymer-Like Modulus”, ACS Applied Materials & Interfaces, 10 43122-43130 (2018) PDF
245. J.-S. Jang, Y.-W. Lim, D.-H. Kim, D. Lee, W.-T. Koo, H. Lee, B.-S. Bae*, and I.-D. Kim* “Glass-Fabric Reinforced Ag Nanowire/Siloxane Composite Heater Substrate: Sub-10nm Metal@Metal Oxide Nanosheet for Sensitive Flexible Sensing Platform”, Small, 14 1802260 (2018) PDF
244. Y. H. Kim, G.-M. Choi, Y. H. Kim and B.-S. Bae “Mechanically improved sol-gel derived methacrylate-siloxane hybrid materials with urethane linkage”, Journal of Sol-Gel Science and Technology, DOI: 10.1007/s10971-018-4803-y (2018) PDF
243. Y-W. Lim, O. E. Kwon, S.-M. Kang, H. Cho, J. Lee, Y.-S. Park, N. S. Cho, W.-Y. Jin, J. Lee, H. Lee, J.-W. Kang, S. Yoo, J. Moon and B.-S. Bae “Built-In Haze Glass-Fabric Reinforced Siloxane Hybrid Film for Efficient Organic Light-Emitting Diodes (OLEDs)”, Advanced Functional Materials, 28 1802944 (2018) PDF
242. S.-Y. Kim, J. Kim, W. H. Cheong, I. J. Lee, H. Lee, H.-G. Im, H. Kong, B.-S. Bae, and J.-U. Park “Alcohol gas sensors capable of wireless detection using In2O3/Pt nanoparticles and Ag nanowires”, Sensors and Actuators B, 259 825-832 (2018) PDF
241. Y. H. Kim, G.-M. Choi, J. G. Bae, Y. H. Kim and B.-S. Bae “High-Performance and Simply-Synthesized Ladder-Like Structured Methacrylate Siloxane Hybrid Material for Flexible Hard Coating”, Polymers, 10 449 (2018) PDF
240. T. J. Yoo+, B. S. Song+, Y. E. Lee, B.-S. Bae and Y. G. Jeong “Effects of Plasticizer on Structures, Non-isothermal Crystallization, and Rheological Properties of Polyarylates”, Journal of Applied Polymer Science, 135 45704 (2018)
+These authors contributed equally		 PDF
239. S.-H. Jeong, J.-K. KIm, Y.-W. Lim, H.-B. Hwang, H.-Y. Kwon, B.-S. Bae, and J. JIn “Squid pen-inspired chitinous functional materials: Hierarchical chitin fibers by centrifugal jet-spinning and transparent chitin fiber-reinforced composite”, APL materials, 6 016102 (2018) PDF

2017
238. M.-S. Hong+, G.-M. Choi+, J. Kim+, J. Jang, B. Choi, J.-K. Kim, S. Jeong, S. Leem, H.-Y. Kwon, H.-B. Hwang, H.-G. Im, J.-U. Park, B.-S. Bae and J. Jin+ “Biommetic Chitin-Silk Hybrids:An Optically Transparent Structural Platform for Wearble Devices and Advanced Electronics”, Advanced Functional Materials, 28 1705480 (2017)
+These authors contributed equally		 PDF
237. E. G. Jeong, S, Kwon. J. H. Han, H.-G. Im, B.-S. Bae and B.-S. Bae “Mechanically enhanced hybrid nano-stratified barrier with defect suppression mechanism for highly reliable flexible OLEDs “, Nanoscale, 9 6370-6379 (2017) PDF
236. D. Lee, Y.-W. Lim, H.-G. Im, S. Jeong, S. Ji, Y. H. Kim, G. -M, Choi, J. -U, Park, J.-Y. Lee, J. Jin and B.-S. Bae “Bioinspired Transparent Laminated Composite Film for Flexible Green Optoelectronics”, ACS Applied Materials & Interfaces, 9 24161–24168 (2017) PDF
235. H. Y. Kim, D.-E. Yoon, J. Jang, G.-M. Choi, D. C. Lee and B.-S. Bae “Quantum Dot/Siloxane Composite Film Exceptionally Stable Against Heat and Moisture”, SID Symposium Digest of Technical Papers, 48 451-454 (2017) PDF
234. B.-S. Bae, G.-M. Choi, Y. H. Kim, Y. H. Kim, and J.-H. Ko “Flexible Hard Coating (Flex9H®) for Foldable Display Cover Plastic Film”, SID Symposium Digest of Technical Papers, 48 215-217 (2017) PDF
233. Y.-W. Lim, H. Lee, H. Y. Kim, J. G. Bae, and B.-S. Bae ” Composition Optimization of Transparent Glass-fabric Reinforced Siloxane Hybrid (GFRHybrimer) Films for Thermally Stable Flexible Display Substrate Film”, SID Symposium Digest of Technical Papers, 48 150-152 (2017) PDF
232. J. Park+, B. G. Hyun+, B. W. An+, H.-G. Im, Y.-G. Park, J. Jang, J.-U. Park and B.-S. Bae “Flexible Transparent Conductive Films with High Performance and Reliability Using Hybrid Structures of Continuous Metal Nanofiber Networks for Flexible Optoelectronics”, ACS Applied Materials & Interfaces, 9 20299-20305 (2017)
+These authors contributed equally		 PDF
231. H. Y. Kim, D.-E. Yoon, J. Jang, G.-M. Choi, D. C. Lee and B.-S. Bae “Heat- and Water-Proof Quantum Dot/Siloxane Composite Film: Effect of Quantum Dot-Siloxane Linkage”, Journal of the Society for Information Display, 25 108-116 (2017) PDF
230. G.-M. Choi, J. Jin, D. Shin, Y. H. Kim, J.-H. Ko, H.-G. Im, J. Jang, D. Jang, and B.-S. Bae “Flexible Hard Coating: Glass-Like Wear Resistant, Yet Plastic-Like Compliant, Transparent Protective Coating for Foldable Display”, Advanced Materials, 29 1700205 (2017) PDF
229. J.-W. Jung+, H.-G. Im+, D. Lee+, S. Yu, J.-H. Jang, K. R. Yoon, Y. H. Kim, J. B. Goodenough, J. Jin, I.-D. Kim, and B.-S.Bae “Conducting Nanopaper: A Carbon-Free Cathode Platform for Li−O2 Batteries”, ACS Energy Letters, 2 673-680 (2017)
+These authors contributed equally		 PDF

2016
228. H. Y. Kim, D.-E. Yoon, J. Jang, D. Lee, G.-M. Choi, J. H. Chang, J. Y. Lee, D. C. Lee, and B.-S.Bae “Quantum Dot/Siloxane Composite Film Exceptionally Stable against Oxidation under Heat and Moisture”, Journal of the American Chemical Society, 138 16478-16485 (2016) PDF
227. J.-Y. Bae, J. Jang, and B.-S.Bae “Transparent, thermally stable methyl siloxane hybrid materials using sol-gel synthesized vinyl-methyl oligosiloxane resin”, Journal of Sol-Gel Science and Technology, 82 253-260 (2016) PDF
226. Y. H. Kim+, Y.-W.Lim+, D. Lee, Y. H. Kim, and B.-S.Bae “A highly adhesive siloxane LED encapsulant optimized for high thermal stability and optical efficiency”, Journal of Materials Chemistry C, 4 10791-10796 (2016)
+These authors contributed equally		 PDF
225. S.-Y.Kim, K. Kim, Y. H. Hwang, J. Park, J. Jang, Y. Nam, Y. Kang, M. Kim, H. J. Park, Z. Lee, J. Choi, Y. Kim, S. Jeong, B.-S. Bae, and J.-U. Park “High-resolution electrohydrodynamic inkjet printing of stretchable metal oxide semiconductor transistors with high performance”, Nanoscale, 8 17113-17121 (2016) PDF
224. J. Jang, H.-G. Im, J. Jin, J. Lee, J.-Y. Lee, and B.-S. Bae “A Flexible and Robust Transparent Conducting Electrode Platform Using an Electroplated Silver Grid/Surface-Embedded Silver Nanowire Hybrid Structure”, ACS Applied Materials & Interfaces, 8 27035-27043 (2016) PDF
223. H. Park, K. R. Yoon, S. K. Kim, I.-D. Kim, J. Jin, Y. H. Kim, and B.-S. Bae “Highly Conducting In2O3 Nanowire Network with Passivating ZrO2 Thin Film for Solution-Processed Field Effect Transistors”, Advanced Electronic Materials, 2 1600218 (2016) PDF
222. Y. Y. Kim, J. J. Park, S. J. Ye, W. J. Hyun, H.-G. Im, B.-S. Bae, and O. O. Park “Novel microlens arrays with embedded Al2O3 nanoparticles for enhancing efficiency and stability of flexible polymer light-emitting diodes”, RSC Advances, 6 65450 (2016) PDF
221. H.-G. Im+, S. Jeong+, J. Jin, J. Lee, D.-Y. Youn, W.-T. Koo, S.-B. Kang, H.-J. Kim, J. Jang, D. Lee, H.-K. Kim, I.-D. Kim, J.-Y. Lee, and B.-S. Bae “Hybrid Crystalline-ITO/Metal Nanowire Mesh Transparent Electrodes and their Application for Highly Flexible Perovskite Solar Cells”, NPG Asia Materials, 8 e282 (2016)
+These authors contributed equally		 PDF
220. J. Jin+, D. Lee+, H.-G. Im, Y. C. Han, E. G. Jeong, M. Rolandi, K. C. Choi and B.-S. Bae “Chitin Nanofiber Transparent Paper for Flexible Green Electronics”, Advanced Materials (Cover paper), 28 5169-5175 (2016)
+These authors contributed equally		 PDF
219. Y. C. Han, E. G. Jeong, H. C. Kim, S. I. Kwon, H.-G. Im, B.-S.Bae, and K. C. Choi “Reliable Thin-film Encapsulation of Flexible OLEDs and Enhancing their Bending Characteristics through Mechanical Analysis”, RSC Advances, 6 40835-40843 (2016) PDF
218. E. G. Jeong, Y. C. Han, H.-G. Im, B.-S. Bae, K. C. Choi “Highly Reliable Hybrid Nano-stratified Moisture Barrier for Encapsulating Flexible OLEDs”, Organic Electronics, 33 150-155 (2016) PDF
217. J. Park, C. S. Kim, Y. S. Kim, Y. C. Park, H. J. Park, B.-S. Bae, J.-S. Park, and H.-S. Kim “The Effect of ITO and Mo Electrodes on the Properties and Stability of In-Ga-Zn-O Thin Film Transistors”, Journal of Electroceramics, 36 129-134 (2016) PDF
216. D. H. Kim, H. J. Park and B.-S. Bae “Highly improved photo-induced bias stability of sandwiched triple layer structure in sol-gel processed fluorine-doped indium zinc oxide thin film transistor”, AIP Advances, 6 035315 (2016) PDF
215. Y. H. Kim, Y.-W. Lim, Y. H. Kim and B.-S. Bae “Thermally Stable Siloxane Hybrid Matrix with Low Dielectric Loss for Copper-Clad Laminates for High-frequency Applications”, ACS Applied Materials & Interfaces, 8 8335-8340 (2016) PDF
214. J.-Y. Bae, H.-W. Kim, Y.-W. Lim, Y. H. Kim and B.-S. Bae “Optically Recoverable, Deep Ultraviolet (UV) Stable and Transparent Sol-Gel Fluoro Siloxane Hybrid Material for UV LED Encapsulant”, RSC advances, 6 26826-26834 (2016) PDF
213. H.-G. Im+, B. W. Ahn+, J. Jin, J. Jang, Y.-G. Park, J. U. Park and B.-S. Bae “High-Performance, Flexible and Robust Metal Nanotrough-Embedded Transparent Conducting Film for Wearable Touch Screen Panels”, Nanoscale, 8 3916-3922 (2016)
+These authors contributed equally		 PDF
212. S. H. Choi, S.-J. Seo, D. Zhao, K.-T. Park, B. S. Kim, T.-S. Kim and B.-S. Bae “Enhanced Luminescence Characteristics of Mesophase Silica Thin Films Doped with In-Situ-Formed Rare Earth Complexes”, Science of Advanced Materials, 8 122-127 (2016)

2015
211. H. J. Park+, Y. Y. Nam+, J. Jin, and B.-S. Bae “Space Charge-Induced Unusually-High Mobility of Solution-Processed Indium Oxide Thin Film Transistor with Ethylene Glycol Incorporated Aluminum Oxide Gate Dielectric”, RSC Advances , 5 102362-102366 (2015)
+These authors contributed equally		 PDF
210. J. H. Kwon, E. T. Kim, H.-G. Im, B.-S. Bae, K. S. Chang, S.-H Ko Park, and K. C. Choi “Metal-Containing Thin-Film Encapsulation with Flexibility and Heat Transfer”, Journal of Information Display , 16(2) 123-128 (2015) PDF
209. J. Kim, S. H. Song, H.-G. Im, G. Yoon, D. Lee, C. Choi, J. Kim, B.-S. Bae, K. Kang and S. Jeon “Moisture Barrier Composites Made of Non-Oxidized Graphene Flakes”, Small , 11(26) 3124-3129 (2015) PDF
208. H. Y. Kim, J. Jin, S. H. Ko Park, I. Y. Eom and B.-S. Bae “350° C processable low-CTE transparent glass-fabric-reinforced hybrimer film for flexible substrates”, Journal of Information Display, 16(1) 57-64 (2015) PDF
207. J.-Y. Bae, Y. H. Kim, H. Y. Kim, Y. B. Kim, J. Jin, and B.-S. Bae “Ultraviolet Light Stable and Transparent Sol-gel Methyl Siloxane Hybrid Material for UV Light Emitting Diode (UV LED) Encapsulant”, ACS Applied Materials & Interfaces, 14(11) 6322-6328 (2015) PDF
206. B. W. AN, B. G. Hyun, S. Y. Kim, M. Kim, M. S. Lee, K. Lee, J. B. Koo, H. Y. Chu, B.-S Bae and J. U. Park “Stretchable and Transparent Electrodes using Hybrid Structures of Graphene-Metal Nanotrough Networks with High Performances and Ultimate Uniformity”, Nano letters, 7(2) 1035-1039 (2015) PDF

2014
205. H.-G. Im, S.-H. Jung, J.H. Jin, D. Lee, J.-Y. Lee, I.-D. Kim, and B.-S. Bae “Flexible Transparent Conducting Hybrid Film Using Surface-Embedded Copper Nanowire Network: A Highly Oxidation-Resistant Copper Nanowire Electrode for Flexible Optoelectronics”, ACS Nano, 8(10) 10973-10979 (2014) PDF
204. J.-S. Seo, and B.-S Bae “Improved Electrical Performance and Bias Stability of Solution-Processed Active Bilayer Structure of Indium Zinc Oxide based TFT”, ACS Applied Materials & Interfaces , 6 15335-15343 (2014) PDF
203. H. J. Park+, Y. Y. Nam+, J. Jin, and B.-S. Bae “Improvement of bias stability of oxyanion-incorporated aqueous sol-gel processed indium zinc oxide TFTs”, Journal of Materials Chemistry C, 2 5998-6003 (2014)
+These authors contributed equally		 PDF
202. Y. H. Kim, J.-Y. Bae, J. Jin, and B.-S. Bae “Sol-Gel derived transparent zirconium-phenyl siloxane hybrid for robust high refractive index LED encapsulant”, ACS Applied Materials & Interfaces, 6 3115-3121 (2014) PDF
201. H.-G. Im, J. Jin, J.-H. Ko, J. Lee, J.-Y. Lee, and B.-S. Bae “Flexible transparent conducting composite films using a monolithically embedded AgNW electrode with robust performance stability”, Nanoscale, 6 711-715 (2014) PDF
200. H. Y. Kim, J.-Y. Bae, Y. H. Kim, and B.-S. Bae “Low Temperature Curable Epoxy Siloxane Hybrid Materials for LED Encapsulant”, Journal of Applied Polymer Science, 131 39968 (2014) PDF
199. J. M. Yun, S. H. Park, Y. H. Hwang, E. S. Lee, U. N. Maiti, H. U. Moon, B. H. Kim, B. S. Bae, Y. H. Kim, S. O. Kim “Complementary p- & n-Type Polymer Doping for Ambient Stable Graphene Inverter”, ACS Nano , 8 650 (2014) PDF

2013
198. E.T. Kim, Y.C. Han, W.H. Kim, K.C. Choi, H.-G. Im, B.-S. Bae “Thin Film encapsulation for organic light emitting diodes using a multi-barrier composed of MgO prepared by atomic layer deposition and hybrid materials”, Organic Electronics, 14 1737-1743 (2013) PDF
197. J.-Y. Bae, Y. H. Kim, H.-Y. Kim, Y.-W. Lim, and B.-S Bae “Sol-Gel Synthesized Linear Oligosiloxane-Based Hybrid Material for a Thermally-Resistance Light Emitting Diode(LED) Encapsulant”, RSC Advances, 3 8871-8877 (2013) PDF
196. Y. H. Hwang, H.-G. Im, H. Park, Y.-Y. Nam, and B.-S Bae “The Effect of Metal Composition on Bias Stability of Solution Processed Indium Oxide Based Thin Film Transistors”, ECS Journal of Solid State Science and Technology, 2 Q200-Q204 (2013) PDF
195. J.-S. Seo, J.-H. Jeon, Y. H. Hwang, H. Park, M. Ryu, S.-H. K. Park, and B.-S. Bae “Solution-Processed Flexible Fluorine-doped Indium Zinc Oxide Thin-Film Transistors Fabricated on Plastic Film at Low Temperature”, Scientific Reports, 3 2085 (2013) PDF
194. Y. C. Han, E. Kim, W. Kim, H.-G. Im, B.-S. Bae, and K. C. Choi “A flexible moisture barrier comprised of a SiO2-embedded organic-inorganic hybrid nanocomposite and Al2O3 for thin-film encapsulation of OLEDs”, Organic Electronics, 14[6] 1436-1440 (2013) PDF
193. Y. H. Hwang and B.-S. Bae “Effect of Aluminum and Gallium Doping on the Performance of Solution-Processed Indium Oxide Thin-Film Transistors”, Jounal of Display Technology, 9 704 (2013) PDF
192. Y. H. Hwang, J.-S. Seo, J. M. Yun, H. Park, S. C. Yang, S.-H. K. Park, and B.-S. Bae “An ‘Aqueous Route’ for Low Temperature Processable Oxide Flexible Transparent Thin-Film Transistors on a Plastic Substrate”, NPG Asia Materials, 5 e45 (2013) PDF
191. J. H. Jin+, J. Lee+, S. C. Yang, J.-H. Ko, H.-G. Im, S.-W. Baek, J.-Y. Lee, and B.-S. Bae, “High-performance hybrid plastic films: a robust electrode platform for thin-film optoelectronics”, Energy & Environmental Science, 6 1881 (2013)
+These authors contributed equally		 PDF
190. S. Y. Kwak, S. C, Yang, N. R. Kim, J. H. Kim, and B.-S. Bae, “Sol-gel derived dye-bridged hybrid materials for white luminescence”, Journal of Sol-Gel Science and Technology, 65[1] 46-51 (2013) PDF
189. H. Park, Y. H. Hwang, and B.-S. Bae, “Sol-gel processed Cu2ZnSnS4 thin films for a photovoltaic absorber layer without sulfurization”, Journal of Sol-Gel Science and Technology, 65[1] 23-27 (2013) PDF

2012
188. M.-S. Kim, Y. H. Hwang, S. Kim, Z. Guo, D.-I. Moon, J.-M. Choi, M.-L. Seol, B.-S. Bae, and Y.-K. Choi “Effects of the oxygen vacancy concentration in InGaZnO-based resistance random access memory”, Applied Physics Letters, 101 243503 (2012) PDF
187. S.-Y. Kwak, N. R. Kim, J. H. Kim, and B.-S. Bae “High color rendering white light-emitting diodes based on a green silicate phosphor mixed with a red dye-bridged hybrid”, RSC Advances, 2 (32) 12371-12377 (2012). PDF
186. J.-S. Kim, Y. H. Kim, J. H. Ko and B.-S. Bae “Thiol-ene Reaction Derived Sol-Gel Hybrid Dielectric Layer for Organic Thin Film Transistors”, ECS Transactions, 50(4) 83-88 (2012) PDF
185. B.-S. Bae, Y. H. Hwang, J.-S. Seo, and G.-M. Choi “Simple Aqueous Solution Route for Fabrication High Performance Oxide TFT”, ECS Transactions, (2012) PDF
184. B.-S. Bae, S.-Y. Kwak, N.-R. Kim, H.-G. Im “High Color Rendering White LED Based on Silicate/Dye-Bridged Siloxane Hybrid Phosphor Encapsulant”, ECS Transactions, 50(4) 83-88 (2012) PDF
183. J.-S. Seo, J.-H. Jeon, Y. H. Hwang, M. K. Ryu, S.-H. K. Park, and B.-S. Bae “Novel Aqueous Solution Processed Fluorine-doped Indium Zinc Oxide (F-IZO) Thin-Film Transistors Fabricated at 200℃”, IMID Proc., 14-2(2012) PDF
182. Y. H. Hwang, J.-S. Seo, Y. Y. Nam, M. K. Ryu, S.-H. K. Park, and B.-S. Bae “Low Temperature Fabrication of Aqueous Solution Processed Flexible Indium Oxide Transparent Thin-Film Transistors on a Plastic Substrate”, IMID Proc., P2-14(2012) PDF
181. S.-Y. Kwak, N. R. Kim, and B.-S. Bae “High Color Rendering White LED Based on Dye-Bridged Siloxane Hybrid Encapsulation Mixed with Silicate Phosphor”, IMID Proc., 44-2(2012) PDF
180. D. Zhao, H. Chen, H. Li, S.-J. Seo, B.-S. Bae, W. Qin “High luminescence quantum efficiency of green mesophase silicate thin film incorporated with rare earth complex”, Materials Chemistry and Physics, 134(1) 50-53 (2012) PDF
179. S. C. Yang, J. H. Jin, S.-Y. Kwak, and B.-S. Bae, “Photo-Curable Transparent Cyclo-Aliphatic Epoxy Hybrid Materials Cross-linked by Oxetane”, Journal of Applied Polymer Science, 126, E380-E386 (2012). PDF
178. J.-Y. Bae, D.S. Lim, H.-G. Yun, M. Kim, J. H. Jin, and B.-S. Bae “A quasi-solid-state dye-sensitized solar cell based on sol-gel derived in situ gelation of a siloxane hybrid electrolyte”, RSC Advances, 2, 5524-5527 (2012) PDF
177. S.-Y. Kwak, N. R. Kim, and B.-S. Bae “Dye-Bridged Hybrid Materials for Robust and High-Performance Wavelength Converter of White LEDs”, SID 2012 DIGEST, P-68, 1314 (2012) PDF
176. J. S. Kim, K. Wubs, B.-S. Bae, and W. S. Kim “Direct stamping of silver nanoparticles toward residue-free thick electrode”, Science and Technology of Advanced Materials, 13(3), 035004 (2012) PDF
175. J. M. Yoon, D. O. Shin, H. K. Seo, D.-W. Kim, Y. I. Kim, J. H. Jin, Y. T. Kim, B.-S. Bae, S. O. Kim, and J. Y. Lee “Fabrication of High-desity In3Sb1Te2 phase change nanoarray on glass-fabric reinforced flexible substrate”, Nanotechnology, 23, 255301 (2012) PDF
174. S. C. Yang, S. Y. Kwak, J. H. Jin, J. S. Kim, Y. W. Choi, K.-W. Paik and B.-S. Bae, “Thermally Resistant UV-Curable Epoxy-Siloxane Hybrid Materials for Light Emitting Diode (LED) Encapsulation”, Journal of Materials Chemistry, 22(18), 8874-8880 (2012) PDF
173. J. S. Kim, S. C. Yang, S. Y. Kwak, Y. W. Choi, K.-W. Paik and B.-S. Bae, “High Performance Encapsulant for Light-Emitting Diodes (LEDs) by a Sol-Gel derived Hydrogen Siloxane Hybrid”, Journal of Materials Chemistry, 22(16), 7954-7960 (2012) PDF
172. J. H. Jeon, Y. H. Hwang, J. H. Jin, and B.-S. Bae, “Low-temperature aqueous solution processed fluorine-doped zinc tin oxide thin-film transistors”, MRS Communication, 2, pp. 17-22 (2012) PDF
171. J. S. Kim, S. Lee, Y. H. Hwang, Y. H. Kim, S. H. Yoo, and B.-S. Bae, “Photo-Curable Sol-Gel Hybrid Film as a Dielectric Layer by a Thiol-ene Reaction in Air or N2 for Organic Thin Film Transistors”, Electrochemical and Solid-State Letters, 15(5), pp. G13-G15 (2012) PDF
170. J. H. Jeon, Y. H. Hwang, and B.-S. Bae, “Bias-Temperature-Illumination Stability of Aqueous Solution Processed Flourine Doped Zinc Tin Oxide (ZTO:F) Transistor”, >Electrochemical and Solid-State Letters, 15(4), pp. H123-H125 (2012) PDF
169. Y. H. Hwang, S. J. Seo, J. H. Jeon, and B.-S. Bae, “Ultraviolet Photo-Annealing Process for Low Temperature Processed Sol-Gel Zinc Tin Oxide Thin Film Transistors”, >Electrochemical and Solid-State Letters, 15(4), pp. H91-H93 (2012) PDF
168. J. H. Jin, S.C Yang, and B.-S. Bae, “Fabrication of a High Thermal-Stable Methacrylate-Silicate Hybrid Nanocomposite: Hydrolytic Vs. Non-hydrolytic Sol-Gel Synthesis of Methacryl-oligosiloxanes”, Journal of Sol-Gel Science and Technology, 61 (2), pp. 321-327 PDF
167. J. H. Jin, J. J. Lee, B.-S. Bae, S. J. Park, S. H. Yoo, and K.H. Jung, “Silica Nanoparticle-Embedded Sol-Gel Organic/Inorganic Hybrid Nanocomposite for Transparent OLED Encapsulation “, Organic Electronics, 13(1), pp53 – 57 (2012). PDF

2011
166. H.G. Yun, B.-S. Bae, Y.S. Jun, and M.G. Kang, “Effective Methods for the High Efficiency Dye-Sensitized Solar Cells Based on the Metal Substrates (book chapter) “, Solar Cells – Dye-Sensitized Devices, Chap 12, pp267 – 278 (2011) PDF
165. K.J. Lee, J.H. Jin, B.-S. Bae, and R. Magnusson, “Guided-Mode Resonance Filters Fabricated with Soft Lithography (book chapter) “, Recent Advances in Nanofabrication Techniques and Applications, Chap 12, pp225 – 240 (2011). (2011). PDF
164. S.Y Kwak, S.C Yang, N.R Kim, J.H. Kim and B.-S. Bae, “Thermally Stable, Dye-Bridged Nanohybrid-Based White Light-Emitting Diodes “, Advanced Materials (Cover Paper), 23, pp5767-5772 (2011). PDF
163. S.-J. Seo, J. H. Jeon, Y.H. Hwang and B.-S. Bae, “Improved Negative Bias Iilumination Instability of Sol-gel Gallium Zinc Tin Oxide Thin Film Transistors “, Applied Physics Letters, 99, pp152102-1 – 152102-3 (2011) PDF
162. S.Y Kwak, N.R Kim, K. Lee, J. Yi, J.H. Kim and B.-S. Bae, “Enhancement of Fluorescence and Lasing Properties of Covalent Bridged Fluorescent Dye in Organic-inorganic Hybrid Materials “, Journal of Sol-gel Science and Technology, 60, pp137-143 (2011). PDF
161. S. Park, K.H Jung, C. Yun, H. Cho, B.-S. Bae, and S. Yoo, “Improved Lifetime of Highly Flexible OLEDs Based on Multilayered Transparent Electrodes with Enhanced Barrier Performance “, Journal of the Society for Information Display, 19(9), pp597-601 (2011) PDF
160. S.-J.Seo, S.C Yang, J.H. Ko and B.-S. Bae, “Effects of Sol-Gel Organic-Inorganic Hybrid Passivation on Stability of Solution-Processed Zinc Tin Oxide Thin Film Transistors “, Electrochemical and Solid-State Letters, 14(9), H375-H379 (2011) PDF
159. S.C Yang, J.H Jin, S.Y Kwak and B.-S. Bae, “Thermo-Mechanical/Thermal Properties of Photo-Cationic Polymerized Cyclos-Aliphatic Epoxy Hybrid Materials “, Macromolecular Research, 19(11), pp1166-1171 (2011). PDF
158. S.C Yang, J.S Kim, J.H Jin, S.Y Kwak and B.-S. Bae, “Cycloaliphatic Epoxy Oligosiloxane-Derived Hybrid Materials for a High-Refractive Index LED Encapsulant “, Journal of Applied Polymer Science, 122[4], pp2478-2485 (2011). PDF
157. J.S Kim, S.C Yang, H. Park and B.-S. Bae, “Photo-Curable Siloxane Hybrid Material Fabricated by Thiol-Ene Reaction of Sol-Gel Synthesized Oligosiloxanes “, Chemical Communications, 47(21), pp6051-6053 (2011). PDF
156. Y.H Hwang, J. H Jeon and B.-S. Bae, “Post-Humid Annealing of Low-Temperature Solution-Processed Indium Based Metal Oxide TFTs “, Electrochemical and Solid-State Letters, 14(7), ppH303-H305 (2011). PDF
155. Y.-C Han, C. Jang, K.J. Kim, K.C. Choi, K.H. Jung, B.-S. Bae, “The encapsulation of an organic light-emitting diode using organic-inorganic hybrid materials and MgO “, Organic Electronics, 12, pp609-613 (2011). PDF
154. H.-G. Yun, B.-S. Bae and M. G. Kang, “A simple and highly efficient method for surface treatment of Ti substrates for use in Dye-sensitized solar cells “, Advanced Energy Materials, 1[3], pp337-342 (2011). PDF
153. H.-G. Yun, J. H. Park, B.-S. Bae and M. G. Kang, “Dye-sensitized solar cells with TiO2 nano-particles on TiO2 nano-tube-grown Ti substrates “, Journal of Materials Chemistry, 21, pp3558-3561 (2011). PDF
152. K.H. Jung, J.-Y. Bae, H.-G. Yun, M.G. Kang and B. -S. Bae, “Novel Ionic Iodide-Siloxane Hybrid Electrolyte for Dye-Sensitized Solar Cells “, ACS Applied Materials and Interfaces, 3(2), pp293-298 (2011). PDF
151. J.Y. Bae, S. Yang, J. Jin, K.H. Jung, J.-S. Kim and B. -S. Bae, “Fabrication of transparent methacrylate zirconium siloxane hybrid materials using sol-gel synthesized oligosiloxane resin “, Journal of Sol-gel Science and Technology, 58[1], pp114-120 (2011). PDF
150. K.H. Jung, J.Y. Bae, S. J. Park, S. Yoo and B.-S. Bae, “High performance organic-inorganic hybrid barrier coating for encapsulation of OLEDs “, Journal of Materials Chemistry, 21, pp1977-1983 (2011). PDF
149. J. Jin, S. Yang, and B. -S. Bae, “Network Structure-Property Relationship in UV-cured Organic/Inorganic Hybrid Nanocomposites “, Polymer Chemistry, 2, pp168-174 (2011). PDF

2010
148. S. Park, K.H. Jung, C. Yun, H. Cho, B.-S. Bae and S. Yoo, “Improved lifetime of highly flexible OLEDs based on multilayer transparent electrodes with enhanced barrier performance “, IDW Proc., (2010).
147. J. Jin, J.H. Ko, S.-J. Seo, Y.H. Hwang, S-H. K. Park, S. M. Yoon, M. K. Ryu, S. H. Yang, O.-S. Kwon, E.-S. Park and B.-S. Bae, “GReCoSS Process for Fabrication of Flexible Oxide TFT;, IMID Proc. (2010). PDF
146. J. H. Jeon, Y.H. Hwang, S.-J. Seo and B.-S. Bae, “Design of Optimized Solution Processed Oxide TFT Composition by Addition of Aluminum to Indium Tin Oxide”, IMID Proc., (2010). PDF
145. J. Jin, J. -H. Ko, S. Yang, and B. -S. Bae, “Rollable Transparent Glass-Fabric Reinforced Composite Substrate for Flexible Devices”, Advanced Materials (Cover paper), 22(40), 4510 (2010). PDF
144. S.-J.Seo, Y.H. Hwang and B.-S. Bae, “Postannealing Process for Low Temperature Processed Sol?GelZinc Tin Oxide Thin Film Transistors”, Electrochemical and Solid-State Letters, 13(10), H357 (2010). PDF
143. J. H. Jeon, Y. H. Hwang, B. S. Bae, H. L. Kwon, and H. J. Kang, “Addition of aluminum to solution processed conductive indium tin oxide thin film for an oxide thin film transistor”, Applied Physics Letters, 96, 212109 (2010). PDF
142. J.-S. Kim, S.C. Yang and B.-S. Bae, “Thermally Stable Transparent Sol-Gel Based Siloxane Hybrid Material with High Refractive Index for Light Emitting Diode (LED) Encapsulation”, Chemistry of Materials, 22, pp3549-3555 (2010). PDF
141. Y.H. Hwang, S.-J.Seo and B.-S. Bae, “Fabrication and characterization of sol-gel derived zinc oxide thin-film transistor”, Journal of Materials Research, 25[4], pp695-700 (2010). PDF
140. S.C. Yang, J.-S. Kim, J.H. Jin, S.-Y. Kwak, and B.-S. Bae, “Thermal resistance of cycloaliphatic epoxy hybrimer based on sol-gel derived oligosiloxane for LED encapsulation”, Journal of Applied Polymer Science, 117, pp2140-2145(2010). PDF
139. D. Zhao, S.-J.Seo, Zhang H, B.-S. Bae, Qin WP, “Synthesis of Well Dispersed Uniform Sub-4 nm Y2O3:Eu3+ Colloidal Nanocrystals”, Journal of Nanoscience and Nanotechnology. 10, pp2036-2039 (2010). PDF
138. J.-H. Oh, S.-Y. Kwak, S.-C. Yang, and B.-S. Bae, “Highly Condensed Fluorinated Methacrylate Hybrid Material for Transparent Low-k Passivation Layer in LCD-TFT”, ACS Applied Materials and Interfaces 2(3), pp913-918(2010). PDF
137. J.-H. Oh, S.-Y. Kwak, S.-C. Yang, and B.-S. Bae, “Highly Condensed Fluorinated Methacrylate Hybrid Material for Transparent Low-k Passivation Layer in LCD-TFT”, ACS Applied Materials and Interfaces 2(3), pp913-918(2010). PDF

2009
136. H.S. Yoo, J.Y. Han, S.W. Kim, D.Y. Jeon, and B.-S. Bae, “Self-Assembled SiO2 Photonic Crystal Infiltrated by Ormosil:Eu(DBM)(3)phen Phosphor and its Enhanced Photoluminescence”, Optics Express, 17[5], pp3732-3740 (2009). PDF
135. Y.H. Hwang, J.H. Jeon, S.-J. Seo, and B.-S. Bae, “Low Temperature Annealed Sol-Gel Aluminum Indium Oxide Thin Film Transistors”, IMID Proc.,pp396-399 (2009). PDF
134. S.C. Yang, J.H. Oh, S.-Y. Kwak, and B.-S. Bae, “Transparent Sol-Gel Hybrid Dielectric Material Coatings for Low k Passivation Layer”, IMID Proc., pp1453-1456 (2009). PDF
133. K.H. Jung, C.H. Yun, J.-Y. Bae, S.H. Yoo, and B.-S. Bae, “High performance Organic-Inorganic Hybrid Materials for Application in OLED Barrier Coating”, IMID Proc., pp806-809 (2009). PDF
132. K.J. Lee, J.H. Jin, B.-S. Bae, and R. Magnusson, “Optical Filters Fabricated in Hybrimer Media with Soft Lithography”, Optics Letters, 34[16], pp2510-2512 (2009). PDF
131. S.C. Yang, S.-Y. Kwak, J.H. Jin, and B.-S. Bae, “Highly Condensed Epoxy-Oligosiloxane Based Hybrid Material for Transparent Low-k Dielectric Coating”, ACS Applied Materials and Interfaces, 1[7], pp1585-1590 (2009). PDF
130. Y.H. Hwang, J.H. Jeon, S.-J. Seo, and B.-S. Bae, “Solution-Processed, High Performance Aluminum Indium Oxide Thin-Film Transistors Fabricated at Low Temperature”, Electrochemical and Solid-State Letters, 12[9], H336-H339 (2009). PDF
129. C.G. Choi and B.-S. Bae, “Organic-inorganic hybrid gate dielectrics for low-voltage pentacene organic thin film transistors”, Synthetic Metals, 159[13], pp1288-1291 (2009). (highlighted as a front cover article) PDF
128. S.-Y. Kwak, C.G. Choi, and B.-S. Bae, “Effect of Surface Energy on Pentacene Growth and Characteristics of Organic Thin-Film Transistors “, Electrochemical and Solid-State Letters, 12[8], G37-G39 (2009). PDF
127. S.C. Yang, J.H. Kim, J.H. Jin, and B.-S. Bae, “Synthesis and Characterization of Nano-Sized Epoxy Oligosiloxanes for Fabrication of Transparent Nano Hybrid Materials”, Journal of Polymer Science B, 47[8], pp756-763 (2009). PDF
126. S.J. Seo, C.G. Choi, Y.H. Hwang, B.S. Bae, “High performance solution-processed amorphous zinc tin oxide thin film transistor”, Journal of Physics D: Applied Physics, 42[3], 035106 (2009). PDF

2008
125. C.G. Choi and B.-S. Bae, “Photo-patternable titanium doped organic-inorganic hybrid gate dielectric in organic thin film transistors”, Journal of Nanoscience and Nanotechnology, 8[9], pp4679-4683 (2008). PDF
124. D.J. Kang and B.S. Bae, “Synthesis and Characterization of Sol–Gel Derived Highly Condensed
Fluorinated Methacryl Silica and Silica–Zirconia Hybrid Materials”, Journal of Non-Crystalline Solids, 354[46-46], pp4975-4980 (2008).		 PDF
123. H.G. Yun, Y. Jun, J. Kim, B.S. Bae, M.G. Kang, “Effect of Increased Surface Area of Stainless Steel Substrates on the Efficiency of Dye-Sensitized Solar Cells”, Applied Physics Letters, 93[13], 133311 (2008). PDF
122. K.H. Jung, B.S. Bae, “Synthesis and Characterization of Photopatternable Epoxy Hybrid Materials for the Fabrication of Thick and Thermally Stable Microstructures with a High Aspect Ratio”, Journal of Applied Polymer Science, 108[5], pp3169-3176 (2008). PDF
121. B.S. Bae, J.H. Kim, J Ko, K.H. Jung, J.H. Jin, S.C Yang, S.W. Kim and D.Y. Jeon, “PDP Fabricated with Low-Temperature Processes Below 300℃ Using Sol-Gel Hybrid Polymers (Hybrimer PDP)”, SID Proc., pp1446-1449 (2008). PDF
120. S.J. Seo, C.G. Choi, Y.H. Hwang and B.S. Bae, “Transparent Amorphous Oxide Thin Film Transistors Fabricated by Solution Coating Process”, SID Proc., pp1254-1257 (2008). PDF
119. C.G. Choi, S.Y. Kwak and B.S. Bae, “Flexible Pentacene Organic Thin Film Transistors using Sol-Gel Hybrid Polymer Gate Dielectrics”, SID Proc., pp1239-1242 (2008). PDF
118. K.S. Suh, J.H. Shin, S.J. Seo and B.S. Bae, “Er3+ Luminescence and Cooperative Upconversion in ErxY2-xSiO5 Nanocrystal Aggregates Fabricated Using Si Nanowires”, Applied Physics Letters, 92[12], 121910 (2008). PDF
117. S.J. Seo, D. Zhao, K.S. Suh, J.H. Shin and B.S. Bae, “Synthesis and Luminescence Properties of Mesophase Silica Thin Films Doped with in-Situ Formed Europium Complex”, Journal of Luminescence, 128[4], pp565–572 (2008). PDF
116. C.G. Choi, S.J. Seo and B.S. Bae, “Solution-Processed Indium-Zinc Oxide Transparent Thin-Film Transistors”, Electrochemical and Solid-State Letters, 11[1], H7-H9 (2008). PDF

2007
115. A. Moujoud, H.J. Kim, S.H. Kang, G.J. Oh, W.S. Kim, B.S. Bae, and S.Y. Shin, “Double Component Long Period Waveguide Grating Filter in Sol-Gel Material”, Optics Express, 15[23], pp15147-15153 (2007). PDF
114. C.G. Choi and B.S. Bae, “Effects of Hydroxyl Groups in Gate Dielectrics on the Hysteresis of Organic Thin Film Transistors”, Electrochemical and Solid-State Letters, 10[11], H347-H350 (2007). PDF
113. C.G. Choi and B.S. Bae, “Organic–Inorganic Hybrid Materials as Solution Processible Gate Insulator for Organic Thin Film Transistors”, Organic Electronics, 8[6], pp 743–748 (2007). PDF
112. D. Zhao, S.J. Seo and B.S. Bae, “Full-Color Mesophase Silicate Thin Film Phosphors Incorporated with Rare Earth Ions and Photosensitizers”, Advanced Materials, 19[21], pp3473-3479 (2007). PDF
111. D.J. Kang and B.S. Bae, “Photo-imageable Sol–Gel Hybrid Materials for Simple Fabrication of Micro-optical Elements”, Accounts of Chemical Research, 40[9], pp 903-912 (2007). PDF
110. D.J. Kang, B.S. Bae and J. Nishii, “Fabrication of Thermally Durable Sub-Wavelength Periodic Structures upon Inorganic-Organic Hybrid Materials by Nano-Imprinting”, Japanese Journal of Applied Physics, 46[6A], pp 3704-3709 (2007). PDF
109. W.S. Kim, M.G. Kim, J.H. Ahn, B.S. Bae, and C. B. Park, “Protein Micropatterning on Bifunctional Organic-Inorganic Sol-Gel Hybrid Materials”, Langmuir, 23[9], pp4732-4736 (2007). PDF
108. J.H. Kim, J.H. Ko and B.S. Bae, “Dispersion of Silica Nano-Particles in Sol-Gel Hybrid Resins for Fabrication of Multi-Scale Hybrid Nanocomposite”, Journal of Sol-Gel Science and Technology, 41[3], pp249-255 (2007). PDF
107. J.Y. Bae, J.I. Jung, S.J. Seo and B.S. Bae, “Formation and Thermal-Induced Changes of Mesostructures in Fluorinated Organosilicate Films”, Microporous and Mesoporous Materials, 98[1-3], pp283-291 (2007). PDF

~2006
106. K.S. Suh, J.H. Shin, S.J. Seo and B.S. Bae, “Large-Scale Fabrication of Single-Phase Er2SiO5 Nanocrystal Aggregates Using Si Nanowires”, Applied Physics Letters, 89[22], pp 223102 (2006). PDF
105. J.Y. Bae, S.H. Choi and B.S. Bae, “Preparation and Optical Characterization of Mesoporous Silica Films with Different Pore Sizes”, Bulletin of the Korean Chemical Society, 27[10], pp1562-1566 (2006). PDF
104. D.J. Kang, J.P. Jeong and B.S. Bae, “Direct Photofabrication of Focal-Lengthcontrolled Microlens Array Using Photoinduced Migration Mechanisms of Photosensitive Sol-Gel Hybrid Materials”, Optics Express, 14[18], pp8347-8353 (2006). PDF
103. K.H. Nam, T.H. Lee, B.S. Bae and M. Popall, “Condensation Reaction of 3-(Methacryloxypropyl)-Trimethoxysilane and Diisobutylsilanediol in Non-Hydrolytic Sol-Gel Process”, Journal of Sol-Gel Science and Technology, 39[3], pp255-260 (2006). PDF
102. W.S. Kim, D.G. Choi and B.S. Bae, “Ultraviolet-Nanoimprint of 40 nm Scale Patterns Using Functionally Modified Fluorinated Hybrid Materials”, Nanotechnology, 17[13], pp 3319-3324 (2006). PDF
101. T.H. Lee, J.H. Kim and B.S. Bae, “Fabrication of Imide Hybrid Nanocomposites Using Amine Modified Oligosiloxanes Nanoclusters”, Polymeric Materials: Science & Engineering Preprints, 94, pp 551-552 (2006). PDF
100. T.H. Lee, J.H. Kim and B.S. Bae, “Synthesis of Colorless Imide-Hybrid Nanocomposites Using Amine Functionalized Oligosiloxanes Nano-building Clusters”, Journal of Materials Chemistry, 16[17], pp 1657-1664 (2006). PDF
99. A. Moujoud, W.S. Kim, B.S. Bae and S.Y. Shin, “Thermally Stable Optical Characteristics of Sol-Gel Hybrid Material Films”, Applied Physics Letters, 88[10], pp 101916 (2006). PDF
98. W.S. Kim, J.H. Jin and B.S. Bae, “Low Adhesive Force of Fluorinated Sol-gel Hybrid Materials for Easy De-moulding in a UV-based Nano-imprint Process”, Nanotechnology, 17, [5], pp 1212-1216 (2006). PDF
97. C.G. Choi, W.S. Kim and B.S Bae, “Low Dielectric Constant Organic-Inorganic Hybrid Materials by Non-Hydrolytic Sol-Gel Method”, Electronic Materials Letters, 1, pp 87-90 (2005). PDF
96. D.J. Kang, W.S. Kim and B.S. Bae, “Direct Photofabrication of Refractive-index-modulated Multimode Optical Waveguide Using Photosensitive Sol-gel Hybrid Materials”, Applied Physics Letters,87[22], 22106 (2005). PDF
95. K.B. Yoon, B.S. Bae and M. Popall, “FABRICATION OF LOW-LOSS WAVEGUIDES USING ORGANIC-INORGANIC HYBRID MATERIALS”, Journal of Nonlinear Optical Physics & Materials ,14, [3], pp399-407 (2005). PDF
94. J.K. Kim, D.J. Kang and B.S. Bae, “Wavelength-Dependent Photosensitivity in a Germanium-Doped Sol-Gel Hybrid Material for Direct Photopatterning”, Advanced Functional Materials, 15[11], pp1870-1876 (2005). PDF
93. W.S. Kim, K.B. Yoon and B.S. Bae, “Nanopatterning of Photonic Crystals with a Photocurable Silica-titania Organic-inorganic Hybrid Material by a UV-based Nanoimprint Technique”, Journal of Materials Chemistry, 15[42], pp4535-4539 (2005). PDF
92. D.G. Choi, J.H. Jeong, Y.S. Sim, E.S. Lee, W.S. Kim and B.S. Bae, “Fluorinated Organic-Inorganic Hybrid Mold as a New Stamp for Nanoimprint and Soft Lithography”, Langmuir, 21[21], pp9390-9392 (2005). PDF
91. K.S. Suh, O.H. Park, B.S. Bae, J.C. Lee, H.J. Choi, and J.H. Shin, “Optical Activation of Si Nanowires Using Er-Doped Sol-Gel Derived Silica”, MRS Symp. Proc., 832, pp F 10.5.1 ~ F 10.5.1 (2004). PDF
90. T.H. Lee, J.H. Kim, J.H. Ko and B.S. Bae, “Synthesis and Characterization of Imide-Oligosiloxanes Hybrid Nanocompisite (Imide HYBRIMER) by Reaction of Nano Amine Modified Oligosiloxane and Dianhydride”, MRS Symp. Proc., 847, pp EE8.8.1~ EE8.8.6 (2004). PDF
89. D.J. Kang, J.K. Kim and B.S. Bae, “Fabrication of Micro-Optical Devices by Holographic Interference of High Photosensitive Inorganic-Organic Hybrid Materials (Photo-HYBIRMER)”, MRS Symp. Proc., 846, pp DD 10.3.1 ~ DD 10.3.6 (2004). PDF
88. S.Y. Kim, S. Augustine, Y.J. Eo, B.S. Bae, S.I. Woo, and J.K. Kang, “Mechanism and Nanosize Products of the Sol-Gel Reaction Using Diphenylsilanediol and 3-Methacryloxypropyltrimethoxysilane as Precursors”, ” The Journal of Physical Chemistry: B, 109[19], pp9397-9403(2005). PDF
87. Y.J. Eo, T.H. Lee, S. Y. Kim, J.K. Kang, Y.S. Han and B.S. Bae, “Synthesis and Molecular Structure Analysis of Nano-Sized Methacryl-Grafted Polysiloxane Resin for Fabrication of Nano Hybrid Materials”, Journal of Polymer Science B, 43[7], 827-836 (2005). PDF
86. B.S. Bae, W.S. Kim and K.B. Yoon, “Fabrication of Zero Bending Loss Flexible Film Optical Waveguide by UV Moulding of Sol-Gel Hybrid Materials”, Integrated Photonics Research and Applications (IPRA) Proceedings, ITuA4, April 11-15, San Diego , USA (2005). PDF
85. Y.J. Eo, J.H. Kim, J.H. Ko, and B.S. Bae, “Optical Characteristic of Photo-Curable Methacryl -Oligosiloxane Nano Hybrid Thick Films” Journal of Materials Research, 20[2], pp401-408 (2005). PDF
84. K.S. Suh, J.H. Shin, O.H. Park, B.S. Bae, J.C. Lee, and H.J. Choi, “Optical Activation of Si Nanowires Using Er-Doped, Sol-Gel Derived Silica” Applied Physics Letters, 86[5], pp 053101 (2005). PDF
83. W.S. Kim, K.S Kim, Y.J. Eo, K.B. Yoon and B.S. Bae, “Synthesis of Fluorinated Hybrid Material for UV Embossing of a Large Core Optical Waveguide Structure” Journal of Materials Chemistry 15[4], pp465-469 (2005). PDF
82. J.H. Chang, C.H Shim, K. J. Kim and B.S. Bae, “Preparation of Mesoporous Silica using MPEG-b-PLA Diblock Copolymers with Controlled Pre Size at Room Temperature”, Journal of Industrial and Engineering Chemistry, 11(3)[1], pp471-474 (2005). PDF
81. W.S. Kim, K.S. Kim, Y.C. Kim and B.S. Bae, “Thermo-wetting Embossing Nano Imprinting of the Organic-inorganic Hybrid Materials”, Thin Solid Films, 476[1], pp181-184 (2005). PDF
80. D.J. Kang, P.V. Phong and B.S. Bae, “Fabrication of High-Efficiency Fresnel-Type Lenses by Pinhole Diffraction Imaging of Sol-Gel Hybrid Materials”, Applied Physics Letters, 85[19], pp4289-4291 (2004). PDF
79. S.Y. Seo, E. S. Kang, J. K. Lee, J. H. Shin and B. S. Bae, “The Thermo-Optic Effect of Si Nanocrystals in Silicon-Rich Silicon Oxide Thin Films”, Applied Physics Letters., 85[13], pp2526-2528 (2004). PDF
78. E.S. Kang, W.S. Kim, K.S. Kim and B.S. Bae, “Modification of Thermo-Optic Characteristics of Sol-Gel Inorganic-Organic Hybrid Materials”, Journal of Sol-Gel Science and Technology, 32[1-3], pp277-280 (2004). PDF
77. O.H. Park , J. Pinot and B.S. Bae, “Photoluminescence of Sol-Gel Hybrid Films Doped with Erbium Tris 8-Hydroxyquinoline”, Journal of Sol-Gel Science and Technology, 32, pp273-276 (2004). PDF
76. B.S. Bae, “High Photosensitive Sol-Gel Hybrid Materials for Direct Photo-Imprinting of Micro-Optics”, Journal of Sol-Gel Science and Technology, 31[1-3], pp309-315 (2004). PDF
75. J.I. Jung, J.Y. Bae and B.S. Bae, “Preparation and Characterization of Structurally Stable Hexagonal and Cubic Mesoporous Silica Thin Films” Journal of Sol-Gel Science and Technology, 31[1-3], pp179-183 (2004). PDF
74. D.J. Kang, T.H. Lee and B.S. Bae, “Fabrication and Characteristics of Sol-Gel Derived Fluorinated Hybrid Material Films”, Journal of Sol-Gel Science and Technology, 31[1-3], pp113-116 (2004). PDF
73. Y.J. Eo, J.H. Kim, J.H. Ko and B.S. Bae, “Preperation and Characterization of Silica-Polymer Nano Hybrid Materials by Nonhydrolytic Sol-Gel Process” XX ICG’04 Proceedings, 20, P-11-046 (2004). PDF
72. W.S. Kim, J.K. Kim, Y.C. Kim and B.S. Bae, “Soft Lithography of Organic-Inorganic Hybrid Glasses for the Fabrication of Micro-Structure Devices” XX ICG’04 Proceedings, 20, 0-11-039 (2004). PDF
71. D.J. Kang, J.K. Kim, and B.S. Bae, “Simple Fabrication of Diffraction Gratings by Two-Beam Interference Method in Highly Photosensitive Hybrid Sol-Gel Films “, Optics Express 12 [17], pp3947-3953 (2004). PDF
70. E.S. Kang, W.S. Kim, D.J. Kim and B.S. Bae, “Reducing the Thermal Dependence of Silica-Based Arrayed-Waveguide Grating Using Inorganic-Organic Hybrid Materials”, IEEE Photonics Technology Letter, 16[12], pp2625-2627 (2004). PDF
69. J.Y. Bae, J.I. Jung and B.S. Bae, “Photochromism in Spiropyran Impregnated Fluorinated Mesoporous Organosilicate Films”, Journal of Materials Research, 19[8], pp2503-2509 (2004). PDF
68. J.I. Jung, J.Y. Bae and B.S. Bae, “Characterization and Mesostructure Control of Mesoporous Fluorinated Organosilicate Films”, Journal of Materials Chemistry, 14[13], pp1988-1994 (2004). PDF
67. O.H. Park, S.J. Kim and B.S. Bae, “Photochemical Reactions in Fluorinated Sol-Gel Hybrid Materials Doped with a Photolocking Agent for Direct Micropatterning”, Journal of Materials Chemistry, 14[11], pp1749-1753 (2004). PDF
66. W.S. Kim, J.H. Lee, S.Y. Shin, Y.C. Kim and B.S. Bae, “Fabrication of Ridge Waveguides by UV Embossing and Stamping of Sol-Gel Hybrid Materials”, IEEE Photonics Technology Letter, 16[8], pp1888-1890 (2004). PDF
65. W.S. Kim, R. Houbertz, T.H. Lee and B.S. Bae, “Effect of Photoinitiator on Photopolymeri- zation of Inorganic.Organic Hybrid Polymers (ORMOCER)”, Journal of Polymer Science B, 42, pp1979-1986 (2004). PDF
64. J.H. Jang, D.J. Kang, and B.S. Bae, “Large Photoinduced Densification in Organically Modified Germanosilicate Glasses”, Journal of American Ceramic Society, 87[1], pp155-158 (2004). PDF
63. J.Y. Bae, O.H. Park, J.I. Jung, K.T. Ranjit and B.S. Bae, “Photoionization of Methylphenothiazine and Photoluminescence of Erbium 8-Hydroxyquinolinate in Transparent Mesoporous Silica Films by Spin-Coating on Silicon” , Microporous and Mesoporous Materials, 67, pp265-271 (2004). PDF
62. J.H. Jang, D.J. Kang, and B.S. Bae, “Direct Photo-Imprinting in High Photosensitive Organically Modified Germanosilicate (ORMOGSIL) Glasses” MRS Symp. Proc., 780, pp Y5.10.1-Y5.10.6 (2003). PDF
61. J.U. Park , E.S. Kang, and B.S. Bae, “Photoinduced Low RefractiveIndex Patterning in a Photosensitive Hybrid Material” MRS Symp. Proc., 780, pp Y3.7.1-Y3.7.6 (2003). PDF
60. J.Y. Bae, J.I. Jung, O.H. Park, B.S. Bae, K.T. Ranjit and L. Kevan, “Synthesis and Characterization of Mesoporous Silica Films by Spin-Coating on Silicon: Photoionization of Methylphenothiazine and Photoluminiscenece of Erbium 8-Hydroxyquinolinate in Mesophorous Silica Films” , Studies in Surface Science and Catalysis, 146, pp65 -68 (2003). PDF
59. E.S. Kang, J.U. Park and B.S. Bae, “Effect of Organic Modifiers on the Thermo-Optic Characteristics of Inorganic-Organic Hybrid Material Films” Journal of Materials Research, 18 [8], pp1889-1894 (2003). PDF
58. O.H. Park, S.Y. Seo, J.I. Jung, J.Y. Bae and B.S. Bae, “Photoluminescence of Mesoporous Silica Films Impregnated with an Erbium Complex”, Journal of Materials Research, 18[5], pp1039-1042 (2003). PDF
57. J. Koo, E.S. Kang and B.S. Bae, “Formation and Optical Characteristics of Sol-Gel Derived Highly Oriented Ferroelectric (Sr,Ba)Nb2O6 Optical Waveguide Thin Films”, Journal of the Korean Physical Society, 42, ppS1161-S1164 (2003). PDF
56. D.J. Kang, J.U. Park, B.S. Bae, J. Nishii and K. Kintaka, “Single-Step Photo Patterning of Diffraction Gratings in Highly Photosensitive Hybrid Gel Films” , Optics Express ,11[10], pp1144-1148 (2003). PDF
55. S.Y. Seo, J.H. Shin, B.S. Bae, N. Park, J.J. Penninkhof and A. Polman, “Erbium-Thulium Interaction in Broadband Infrared Luminescent Silicon-Rich Silicon Oxide”, Applied Physics Letters, 82[20], pp3445-3447 (2003). PDF
54. O.H. Park, S.Y. Seo, J.H. Shin and B.S. Bae, “Indirect Excitation of Er3+ in Sol-Gel Hybrid Films Doped with an Erbium Complex”, Applied Physics Letters, 82[17], pp2787-2789 (2003). PDF
53. J.U. Park, W.S. Kim and B.S. Bae, “Photoinduced Low Refractive Index in a Photosensitive Organic-Inorganic Hybrid Material”, Journal of Materials Chemistry, 13[4], pp738-741 (2003). PDF
52. T.H. Lee, E.S. Kang and B.S. Bae “Catalytic Effects of Aluminum Butoxyethoxide in Sol-Gel Hybrid Hard Coatings” Journal of Sol-Gel Science and Technology , 27[1], pp23-29 (2003). PDF
51. E.S. Kang, J.Y. Bae and B.S. Bae, “Measurement of Thermo-Optic Coefficients in Sol-Gel Hybrid Glass Films” , Journal of Sol-Gel Science and Technology , 26[1-3], pp981-984 (2003). PDF
50. J.I. Jung, O.H. Park and B.S. Bae, “Fabrication of Channel Waveguides by Photochemical Self-Developing in Doped Sol-Gel Hybrid Glass”, Journal of Sol-Gel Science and Technology , 26[1-3], pp897-901 (2003). PDF
49. E.S. Kang, T.H. Lee and B.S. Bae, “Measurement of Thermo-Optic Coefficients in Sol-Gel Derived Inorganic-Organic Hybrid Material Films”, Applied Physics Letters, 81[8], pp1438~1440 (2002). PDF
48. B.S. Bae, O.H. Park , R. Charters, B. Luther-Davies and G. R. Atkins “Direct Laser Writing of Self-Developed Waveguides in Benzyl Dimethyl Ketal-Doped Sol-Gel Hybrid Glass”, Journal of Materials Research, 16[11], pp 3184-3187 (2001). PDF
47. B.S. Bae, O.H. Park , R. Charters, B. Luther-Davies and G. R. Atkins “Direct Laser Writing of Self-Developed Waveguides in Benzyl Dimethyl Ketal-Doped Sol-Gel Hybrid Glass”, Journal of Materials Research, 16[11], pp 3184-3187 (2001). PDF
46. J. Koo, J. H. Jang and B. S. Bae, “Preparation and Characteristics of Seeded Epitaxial (Sr,Ba)Nb2O2 Optical Waveguide Thin Films using Sol-Gel Method”, Journal of Materials Research, 16[2], pp430-436 (2001). PDF
45. B.S. Bae, J.I. Jung and O.H. Park , “Photochemical Self-Developing of Doped Sol-Gel Hybrid Glass Waveguides”, SPFE Proc, 4279, pp 101-108 (2001). PDF
44. J.Koo, E.S.Kang and J.H.Jang, “Nonlinear Optical Characteristics of Sol-Gel Derived Highly Oriented Ferroelectric Strontinum Barium Niobate Films”, SPFE Proc, 445316 , pp 191-199 (2001). PDF
43. H. Lee, I. Y. Kim, S.-S. Han, B.-S. Bae, M.K. Choi and I. S. Yang, “Spectroscopic Ellipsometry and Raman Study of Fluorinated Nanocrystalline Carbon Thin Films”, Journal of Applied Physics, 90[2], pp 813-818 (2001). PDF
42. S.S. Han and B.S. Bae, “Thermal Stability of Fluorinated Amorphous Carbon Thin Films with Low Dielectric Constant”, Journal of The Electrochemical Society, 148[4], pp F67-F72, (2001). PDF
41. J. Koo, J. H. Jang and B. S. Bae, “Crystallization Behavior of Sol-Gel-Derived Strontium Barium Niobate Thin Films”, Journal of American Ceramic Society, 84[1], pp193-199 (2001). PDF
40. J. Koo, J.H. Jang and B.S. Bae, “Optical and Electrical Properties of Ferroelectric SBN Thin Films Prepared by Sol-Gel Process”, Journal of Sol-Gel Science and Technology, 19[1-3], pp611-614 (2000). PDF
39. H.R. Kim, O.H. Park, Y.K. Choi and B.S. Bae, “Photobleaching of γ-Glycidoxypropyltrimethoxysilane-Chelated Metal Alkoxide Gel Films”, Journal of Sol-Gel Science and Technology, 19[1-3], pp607-610 (2000). PDF
38. J.H. Jang, J. Koo and B.S. Bae, “Fabrication and Ultraviolet Absorption of Sol-Gel Derived Germanium Oxide Glass Thin Films”, Journal of American Ceramic Society, 83[6], pp1356-1360 (2000). PDF
37. J. Koo, C. Lee, J.H. Jang, K. No and B.S. Bae, “Measurement of the Linear Electro-Optic Coefficients of Sol-Gel Derived Strontium Barium Niobate Thin Films Using Two-Beam Polarization Interferometer” , Applied Physics Letters, 76[19], pp2671-2673 (2000). PDF
36. J.H. Jang, J. Koo and B.S. Bae, “Photobleching of Sol-Gel Derived Germanium Oxide Glass Thin Films”, Journal of Materials Research, 15[2], pp282-284 (2000). PDF
35. H.J. Hong, J. Jung, A.Y. Jeong, D.P. Kim and B.S. Bae, “Optical Absorption and Fluorescence of NADH Encapsulated Sol-Gel Silicate Gels”, The Korean Journal of Ceramics, 6[4], pp359-363 (2000). PDF
34. J.H. Jang, J. Koo and B.S. Bae, “Photosensitivity of Germanium Oxide and Germanosilicate Glass Sol-Gel Thin Films”, Journal of Non-Crystalline Solids, 259, pp144-148 (1999). PDF
33. O.H. Park, Y.J. Eo, Y.K. Chio and B.S. Bae, “Preparation and Optical Properties of Sililca-Poly(ethylene oxide) Hybrid Mateirlas”, Journal of Sol-Gel Science and Technology, 16[3], pp235-241 (1999). PDF
32. S.S. Han, H.R. Kim and B.S. Bae, “Depostion of Fluorinated Carbon Thin Films as an Low-Dielectric-Constant Material”, Journal of The Electrochemical Society, 146[9], pp3383-3388 (1999). PDF
31. J. Koo, J.H. Jang and B.S. Bae, “Highly Oriented (Pb,La)TiO3 Thin Films Prepared by Sol-Gel Process”, Journal of Materials Science, 34[20], pp5075-5080 (1999). PDF
30. B.H. Jun, J.S. Lee, D.W. Kim, T.H. Sung, B.S. Bae and K. No, “Composition, Oxidation, and Optical Properties of Fluorinated Silicon Nitride Film by Inductively Coupled Plasma Enhanced Chemical Vapor Deposition”, Journal of Materials Research, 14[3], pp995-1001 (1999). PDF
29. T.K. Kim, S.S. Han and B.S. Bae, “Optical and Electrical Properties of Amorphous Thin Films in GexTe1-x System”, Metals and Materials, 5[1], pp33-37 (1999). PDF
28. O.H. Park , Y.J. Eo, Y.K. Choi and B.S. Bae, “Optical Characterization of Silica-PEO Hybrid Thin Film”, Organic/Inorganic Hybrid Material II MRS Symp. Proc., 576, pp445-450 (1999). PDF
27. J. Koo, K. No and B.S. Bae, “Synthesis and Characterization of Highly Oriented Sol-Gel (Pb,La)TiO3 Thin Film Optical Waveguides”, Journal of Sol-Gel Science and Technology, 13[1-3], pp869-872 (1998). PDF
26. Y.J. Eo, D.J. Kim, B.S. Bae, K.C. Song, T.Y. Lee and S.E. Song, “Coating of TEOS/VTES Hybrid Solution on Polymer Films”, Journal of Sol-Gel Science and Technology, 13[1-3], pp409-413 (1998). PDF
25. D.S. Yoon, J. Koo, S.J. Kim, B.S. Bae, W.J. Lee, S.H.Cho and K. No, “Preparation and Waveguiding Properties of Sol-Gel Derived Lathanum Modified Lead Titanate Slab Waveguides”, Integrated Ferroelectrics, 20[1-4], pp141-158 (1998). PDF
24. S.S. Han, B.H. Jun, K. No and B.S. Bae, “Preparation of a-SiNx Thin Film with Low Hydrogen Content by Inductively Coupled Plasma Enhanced Chemical Vapor Deposition (ICP-CVD)”, Journal of the Electrochemical Society 145[2], pp652-658 (1998). PDF
23. J. Koo, D.Y. Kim, B.S. Bae and S.I. Kwun, “Electro-Optic Characterization of Sol-Gel Derived (Pb,La)TiO3 Thin Films”, Journal of the Korean Physical Society, 32, pp.S1431-S1433 (1998).
22. B.H. Jun, S.S. Han, J.S. Lee, Y.B. Kim, H.Y. Kang, Y.B. Koh, Z-T. Jiang, B.S. Bae and K. No, “Fluorinated Silicon Nitride Film for the Bottom Antireflective Layer in Quarter Micron Optical Lithography”, Semiconductor Science & Technology, 12, pp921-926 (1997). PDF
21. J. Koo, B.S. Bae and H.K. Na, “Raman Spectroscopy of Copper Phosphate Glasses”, Journal of Non-crystalline Solids, 212, pp173-179 (1997). PDF
20. S. Hong, E. Kim, Z-T. Jiang, B.S. Bae, K. No, S.C. Lim, S.G. Woo and Y.B. Koh, “Effects of Gas Ring Position and Thickness Uniformity”, Material Science & Engineering: B, 45[1-3], pp98-101 (1997). PDF
19. J. Koo, S.U. Kim, D.S. Yoon, K. No and B.S. Bae, “Effect of Heat Treatment on Formation of Sol-Gel (Pb,La)TiO3 Films for Optical Application”, Journal of Material Research, 12[3], pp812-818 (1997). PDF
18. Z.T. Jang, S. Hong, E. Kim, B.S. Bae, S. Lim, S.G. Woo, Y.B. Koh and K. No, “Single-Layer Halflife Phase-shifting Masks for DUV Microlithography : Optical Simulation and Chromium Compound Film Preparation”, Applied Surface Science, 114, pp680-684 (1997). PDF
17. B.H. Jun, S.S. Han, K.S. Kim, J.S. Lee, Z-T. Jiang, B.S. Bae and K. No, “Titanium Oxide Film for Bottom Antireflective Layer in Deep Ultraviolet Lithography”, Applied Optics, 36[7], pp1482-1486 (1997). PDF
16. J. Koo, C. Lee, K. No and B.S. Bae, “Epitaxial Growth and Optical Properties of Sol-Gel (Pb,La)TiO3 Thin Films for Waveguides”, Epitaxial Oxide Thin Films III, MRS Symp. Proc., 474, pp61-66 (1997). PDF
15. S.S. Han, B.H. Jun, K. No and B.S. Bae, “Characterization of a-SiNx Thin Film Deposited by Inductively Coupled Plasma Enhanced Chemical Vapor Deposition”, MRS Symp. Proc., 446, pp139-144 (1997). PDF
14. B.H. Jun, S.S. Han, D.W. Kim, H.Y. Kang, Y.B. Koh, B.S. Bae and K. No, “The Applicability of Fluorinated Silicon Nitride Film as Bottom Antireflective Layer in Deep Ultraviolet Lithography”, MRS Symp. Proc., 446, pp115-120 (1997). PDF
13. S. Hong, E. Kim, B.S. Bae, K. No, S.C. Lim, S.G. Woo and Y.B. Koh, “A Simulation Model for Thickness Profile of the Film Deposited Using Planar Circular Type Magnetron Sputtering Sources”, Journal of Vacuum Science & Technology A, 14[5], pp2721-2727 (1996). PDF
12. Z-T. Jiang, S. Hong, E. Kim, B.S. Bae, K. No, C.K. Hwangbo, S.C. Lim, S.G. Woo and Y.B. Koh, “Optical Property Simulation of Single-Layer Halftone Phaseshifting Masks for DUV microlithography”, Semiconductor Science & Technology, 11, pp1450-1455 (1996). PDF
11. D.J Kim, B.S. Bae and H. Kim, “Effect of Zirconia Mixing Route on Densification of Alumina Reinforced with Silicon Carbide Whiskers”, Advances in Ceramic-Matrix Composites Ⅲ, Ceramic Transactions, 74, pp311-317 (1996).
10. J. Koo, S.S. Han and B.S. Bae, “Fabrication and Characterization of Sol-Gel Ternary Titanium Silicate Waveguides”, The Korean Journal of Ceramics, 2[2], pp89-94 (1996). PDF
9. S. Hong, E. Kim, Z-T. Jiang , S.C. Lim, S.G. Woo, Y.B. Koh, B.S. Bae and K. No, “Investigation on Applicability of Chromium-based Materials to Attenuated Phase Shift Mask for DUV Exposure”, SPIE Proceeding, 2793, pp134-137 (1996).
8. K. No, C.J. Kim, D.S. Yoon, J.S. Lee, C.G. Choi, W.J. Lee and B.S. Bae, “Texturing and Electrical Characteristics of Sol-Gel Derived Ferroelectric Thin Films”, Integrated Ferroelectrics, 9[1-3], pp159-168 (1995). PDF
7. D.S. Yoon, S.W. Kim, J. Koo, Z-T. Jiang, B.S. Bae, W.J. Lee, K.S. No and S.H. Cho, “Effects of Drying Temperature on the Optical Properties of Solution Derived (Pb, La)TiO3 Thin Films”, The Korean Journal of Ceramics, 1[4], pp191-196 (1995). PDF
6. B.S. Bae, J. Koo and D.H. Kim, “Thermal Properties of Copper Phosphate Glasses”, Proceeding of SEAS’95, pp12-15 (1995).
5. B.S. Bae, W.J. Lee, K. No, D.S. Yoon and S.U. Kim, “Optical Properties of Sol-Gel PLT Thin Films for Waveguide Application” Thin Films for Integrated Optics Applications, MRS Symp. Proc., 392, pp279-285 (1995).
4. B.S. Bae and M.C. Weinberg, “Chemical Durability of Copper Phosphate Glasses”,Glass Technology, 35[2], pp83-88 (1994).
3. B.S. Bae and M.C. Weinberg, “Optical Absorption of Copper Phosphate Glasses in the Visible Spectrum”, Journal of Non-Crystalline Solids, 168, pp223-231 (1994). PDF
2. B.S. Bae and M.C. Weinberg, “UV Optical Absorptions of Semiconducting Copper Phosphate Glasses”, Journal of Applied Physics, 73[11], 1, pp7760-7766 (1993). PDF
1. B.S. Bae and M.C. Weinberg, “Crystallization of Copper Metaphosphate Glass”, Journal of the American Ceramic Society, 76[6], pp1395-1400 (1993). PDF

ABOUT US

Inroduction
Location
Contact us

PEOPLE

Professor
Members
Alumni

RESEARCH

Siloxane Hybrid Material
Flexible Hard Coating
QD-Siloxane Hybrid
Flexible Plastic Film
LED Encapsulant
Solution Processed Oxide TFT
Equipment

LECTURE

Lecture

PUBLICATION

Publications

BOARD

News
Gallery
Video

Lap of Optical Material Center (LOMC), KAIST Room 2308, Building W 1-1,
Korea Advanced Institute of Science and Technology (KAIST), Daehak-ro 291, Yuseong-gu, Daejeon
Tel.042-350-5119 / Fax.042-350-3310